Para menu principal

Escolha um país para ler o conteúdo específico da sua região geográfica e idioma.

Especialistas

Expert level
Idiomas que fala
Avaliação
Desenvolvimento
Civil infrastructure
Indústria de produção
Arquitetura, Engenharia e Construção
Software
Indústria de processamento
Média e entretenimento
Certificaat niveau
  • Adri

    a Mechanical Engineer

    Enschede, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk AutoCAD Plant 3D
    3D modelling
    3D design
    Projeto mecânico 3D
    Autodesk AutoCAD Mechanical
    Autodesk Inventor
    Systems engineering
    Structural engineering

    3D design, 3D modeling, energy, food, installations, tanks, drums, SKIDs etc etc More than 25 years experience in 3D modeling and design in a wide range of industries. )

    Consultar perfil
  • Andrew

    a Manager Projects

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Projetos e designs 2D
    Bentley Microstation
    Microsoft Office

    Our clients span the globe and I have been lucky enough to have been involved in the training, consultancy, aeronautical chart migration and customer support in various locations for diverse projects.)

    Consultar perfil
  • Antonio

    a Architectural designer | BIM Specialist | BREEAM associate

    Surrey, United Kingdom

    €1.200,-

    por dia (IVA excluído)
    Modelagem BIM
    Coordenação do modelo BIM
    Coordenação de projeto BIM
    BIM
    Autodesk Navisworks
    Autodesk Revit
    Desenhos e esboços
    Desenho técnico
    Mais áreas de especialização

    Successfully delivered large-scale and complex projects, as well as small bespoke projects, across different sectors, with a variety of clients and budgets. Passionate about design and research of innovative solutions, driven by new technologies.)

    Consultar perfil
  • Arjen

    a Business Consultant

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Cadac Organice Vault
    Autodesk Inventor
    Autodesk Vault
    Autodesk Revit
    Microsoft SharePoint
    Asset management
    Autodesk AutoCAD
    3D modelling
    Mais áreas de especialização

    I ensure that your technical information is simple, reliable and safe available for the right people. With your most important processes as a starting point, I find an efficient solution)

    Consultar perfil
  • Arthur

    a Product Specialist "NedOmgeving"

    Vijfheerenlanden, Netherlands

    €1.200,-

    por dia (IVA excluído)
    QGIS
    GIS Geographic Information System
    Gestão de dados e cooperação
    FME
    Microsoft Office
    Photogrammetry

    Product Specialist at NedGraphics for NedOmgeving. This involves management of the product backlog item and making sure that NedGraphics produces software that the market wants and needs.)

    Consultar perfil
  • Ate

    a Senior Consultant

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    CPQ
    Gestão de dados e cooperação
    Integração de sistemas

    With over a decade of experience in CPQ software, processes and integrations I can analyze the needs of your organisation and support you with successful implementations.)

    Consultar perfil
  • Bart

    a Bim Specialist Consultancy & Engineering

    Reusel-de Mierden, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk Revit MEP
    Autodesk BIM 360 Design
    Coordenação do modelo BIM
    Autodesk BIM 360
    Coordenação de projeto BIM
    Autodesk Dynamo
    3D visualisation
    Virtual Reality (VR)
    Mais áreas de especialização

    Your BIM specialist can be used broadly and flexibly within a project team with a passion for innovation and digital building processes.)

    Consultar perfil
  • Bas

    b Robot Gripper Expert

    Delft, Netherlands

    €1.000,-

    por dia (IVA excluído)
    Autodesk Fusion 360
    Autodesk Inventor
    3D design
    2D design & 2D drawing
    Criação de projetos
    Technical drawing
    Desenvolvimento e inovação de produtos
    Design for additive manufacturing (DfAM)
    Mais áreas de especialização

    BVM.engineering is gespecialiseerd in het ontwerpen, fabriceren en assembleren van Robot end-effectors / end of arm tools.)

    Consultar perfil
  • Ben

    a Sr. Piping Engineer/ Field Engineer

    Alblasserdam, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Plant engineering
    Modelagem 3D
    Projeto 3D
    Autodesk AutoCAD Plant 3D
    Plant design
    Autodesk Navisworks
    Autodesk AutoCAD
    Autodesk AutoCAD P&ID

    Skilled Piping Engineer with extensive experience working with both 2D and 3D models of new piping systems. Ability to utilise a variety of surveying interfaces to best serve the needs of the client.)

    Consultar perfil
  • Benjamin

    a CAM Developer

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk Inventor CAM
    Autodesk Inventor
    Microsoft Office
    Desenvolvimento e inovação de produtos
    Programação CNC
    CAM para transformações CNC
    CNC post processors
    CNC

    Using a post processor written in Javascript I can help to automate your machining processes with CAM via Inventor and Fusion. Whether machining metal, wood or synthetic material, the possibilities are almost endless.)

    Consultar perfil
  • Bjorn

    a Consultant Manufacturing

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Cadac Organice Vault
    Autodesk Vault
    Autodesk AutoCAD Mechanical
    Autodesk Factory Layout
    Cadac NXTdim
    Systems engineering
    Cadac Modules
    Autodesk Inventor
    Mais áreas de especialização

    Al meer dan 12 jaar adviseer, train en begeleid ik klanten om het optimale uit Factory Design tooling en Inventor te halen, zodat deze aansluit op de processen van de organisatie. Uiteraard moeten deze processen goed beheerd worden op basis van Vault Pro.)

    Consultar perfil
  • Björn

    a Product Manager

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Cadac TheModus
    Autodesk BIM 360 Design
    Autodesk Revit MEP
    Autodesk BIM 360 Build
    Autodesk Navisworks
    Cadac Modules
    Autodesk Revit
    Autodesk BIM 360 Docs
    Mais áreas de especialização

    With 20 years of experience in the construction and BIM sector, I support in researching processes, advising on optimisations, supporting with implementations, designing software solutions and managing the development processes of these software solutions)

    Consultar perfil
  • Bram

    b Consultant HVAC

    Vijfheerenlanden, Netherlands

    €1.000,-

    por dia (IVA excluído)
    HVAC
    Autodesk Revit MEP
    Criação de projetos
    Drawing and sketching
    Gestão de dados e cooperação
    Technical drawing

    As an experienced designer of HVAC installations with an eye for both technology and finance, I am familiar with the information that is important to you. I like to help designing installers and HVAC advisors to prevent failure costs. )

    Consultar perfil
  • Christopher

    a AEC Consultant

    Greater London, United Kingdom

    €1.200,-

    por dia (IVA excluído)
    Autodesk Collaboration for Revit (C4R)
    Autodesk Revit
    Criação de Revit Family
    Autodesk Revit MEP
    Common Data Environment (CDE)
    Autodesk BIM 360 Design
    Autodesk BIM 360 Docs
    Autodesk BIM 360
    Mais áreas de especialização

    Whatever your needs are, solutions are not far away, let me help you handover your project in a creative and innovative way from the design stage right through to handover.)

    Consultar perfil
  • Daniel

    a Draughtsman/ Work Planner/Engineer

    Geldrop-Mierlo, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk Inventor
    Autodesk AutoCAD
    iLogic
    Autodesk Vault
    Microsoft Office
    Data management & collaboration

    I have extensive experience in product development, project management, work preparation and (technical) drawing ( using Inventor and Solid Works). I like to be involved in the entire process, from concept to blueprint.)

    Consultar perfil
  • Pascal

    a Ceo 3D Drawing & Management

    West-Vlaanderen, Belgium

    €1.200,-

    por dia (IVA excluído)
    3D design
    Visualização 3D
    Renderização 3D
    Modelagem 3D
    Criação de projetos
    Autodesk AutoCAD Mechanical
    Autodesk Factory Layout
    Autodesk Fusion 360
    Mais áreas de especialização

    With more than a decade of experience, industrial construction no longer holds any secrets for me. )

    Consultar perfil
  • David

    a Solution Architect

    1 review(s)

    Antwerpen, Belgium

    €1.200,-

    por dia (IVA excluído)
    Generative design
    Autodesk Fusion 360
    Projeto PCB
    Additive manufacturing
    Simulação
    Desenvolvimento e inovação de produtos

    I have extensive experience in the CAD industry. My interests have always remained very broad, but I have also specialised in everything that has to do with simulation. In addition, automation is one of my big passions.)

    Consultar perfil
  • Dirkjan

    a Autodesk BIM en Infra-Consultant

    Vijfheerenlanden, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk Civil 3D
    Autodesk InfraWorks
    Autodesk 3ds Max
    Autodesk Navisworks
    Autodesk BIM 360 Docs
    Coordenação do modelo BIM
    OTL
    NedInfra
    Mais áreas de especialização

    Veel ervaring met het maken van 3D visualisaties, betrokken geweest bij civiele projecten. Werkzaam als infra-consultant en BIM adviseur voor de AEC collectie. Geef trainingen aan mensen uit de GWW sector, waarbij collaboration in het BIM model centraal staat.)

    Consultar perfil
  • Ed

    a Industrieberater

    1 review(s)

    Hengelo, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk Fusion Lifecycle
    LISP
    Autodesk AutoCAD Mechanical
    Systems engineering
    Projeto mecânico 3D
    Autodesk Vault
    Desenvolvimento e inovação de produtos
    Product lifecycle management (PLM)
    Mais áreas de especialização

    Produzieren ist eine Kunst! PLM- und PDM-Software unterstützen Verkaufs-, Design-, Produktions- und Wartungsprozesse. Ein ideales Werkzeug, um Verbesserungsmaßnahmen zu ergreifen. Ich unterstütze Herausforderungen am Wurzel um nachdem gemeinsam zu verfahren.)

    Consultar perfil
  • Edwin

    a Support Engineer

    1 review(s)

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk AutoCAD
    Autodesk Revit MEP
    Autodesk Revit Structure
    Autodesk Revit
    Cadac TheModus
    Technical drawing
    Aplicações de design CAD
    Software de design CAD
    Mais áreas de especialização

    Beitritt zu Nordined-Prequest ende 2006 zur Unterstützung von AutoCAD (LT) und Nordined (LT) / Techline. Seit 2012 Teil der Cadac Group AEC. Bei dieser übergang wurde Revit / TheModus zu meiner Softwareliste hinzugefügt. )

    Consultar perfil
  • Edwin

    a BIM Coordinator MEP

    Sneek, Netherlands

    €1.200,-

    por dia (IVA excluído)
    MEP
    Coordenação de projeto BIM
    Modelo de edifícios
    Gestão de dados e cooperação
    Autodesk Revit
    Autodesk AutoCAD Map 3D
    Autodesk AutoCAD
    Autodesk Revit MEP
    Mais áreas de especialização

    Highly experienced Autodesk Certified Professional. Keywords: expert, supporter, connector, solution-focused, co-thinker.)

    Consultar perfil
  • Elbert

    a Consultant

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk Revit MEP
    Autodesk Collaboration for Revit (C4R)
    Criação de Revit Family
    Autodesk Revit
    Visualização 3D
    Renderização 3D
    Modelagem 3D
    Desenho técnico
    Mais áreas de especialização

    With 7 years’ experience as a draftsmen and 7 years’ experience as a Revit modeller I now like to share my knowledge. I will train you or your employees the do the next project in Revit. After that I can implement BIM 360 at your organisation.)

    Consultar perfil
  • Erdal

    a Mechanical Developer / Engineer / Designer

    Doetinchem, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Projetos e designs 2D
    Autodesk Inventor
    Autodesk Vault
    Microsoft Office
    3D modelling
    Drawing and sketching
    Desenvolvimento e inovação de produtos
    Industrial design
    Mais áreas de especialização

    Ik heb ruime ervaring met werktuigbouwkunde. Gestart als draaier, frezer, slijper etc. tot aan ontwerpen van high tech machines. De laatste 10 jaar ben ik voornamelijk bezig geweest met het ontwerpen / engineeren van zeer diverse (speciaal) machines. Vanwege mijn praktijkervaring zit ik veel tussen Concept fase > 3D ontwerp. Flexibel, pragmatisch, aanpakker en prettig om mee samen te werken zijn veelal woorden die ik te horen krijg van opdrachtgevers, managers en collega’s.)

    Consultar perfil
  • Flip

    b Consultant Manufacturing

    Vianen, Netherlands

    €1.000,-

    por dia (IVA excluído)
    Autodesk Fusion Lifecycle
    Product lifecycle management (PLM)
    Microsoft Office
    Desenvolvimento e inovação de produtos

    As a Consultant Manufacturing I support customers to accelerate their product development process across all departments and locations by implementing a Product Lifecycle Management system; “Autodesk Fusion Lifecycle”.)

    Consultar perfil
  • Frank

    a Manager Digital Fabrication

    Heerlen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk PowerMill
    Autodesk FeatureCAM
    Autodesk Inventor CAM
    Autodesk Fusion 360
    Integração de sistemas
    Autodesk Fusion Team
    Autodesk PowerInspect
    Autodesk HSMWorks
    Mais áreas de especialização

    We provide Autodesk Software and help the manufacturing industry automate and digitize all business processes by using our CAD-CAM products.)

    Consultar perfil
  • Gerard

    a CAD/CAM Engineer

    Gilze en Rijen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    CAD software
    Software de design CAD
    Aplicações de design CAD
    Projeto CAD
    CAD / CAM
    3D CAD software
    CAM para transformações CNC
    CAM
    Mais áreas de especialização

    Extensive practical experience in machining (+25 years) | Extensive experience with various CAD and CAM systems (+20 years) | Extensive experience in the High Tech Industry | Extensive experience in providing various training courses)

    Consultar perfil
  • Henny

    a Senior CAD/GIS Software Consultant

    Groesbeek, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk AutoCAD
    Autodesk AutoCAD Map 3D
    C#
    VB.net
    TopoCAD (BGT)
    NedValidatie

    I work at the intersection of CAD and GIS. With almost 40 years of experience including as a software developer at NedGraphics and international business consultant at Autodesk EMEA, now working as an independent consultant with a focus on Autodesk software.)

    Consultar perfil
  • Herm Jan

    a Consultant Manufacturing, PCF specialist

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Cadac NXTdim
    Autodesk Configurator 360
    Autodesk Factory Layout
    Autodesk Inventor
    Autodesk Vault
    3D modelling
    Technical drawing
    Criação de projetos
    Mais áreas de especialização

    Sinds 2001, houd ik mij bezig met Autodesk Inventor. Naast mijn brede Inventor kennis heb ik mij gespecialiseerd in het geven van trainingen in, en maken van, product configuratoren in Autodesk Inventor. )

    Consultar perfil
  • Hilbert

    a Consultant

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Projeto 3D
    Autodesk Revit
    Cadac Modules
    CPQ
    Criação de Revit Family
    Microsoft Office

    To support companies on their way from "Engineering-to-Order" production to "Configure-to-Order"; analysing and building product configurators for easy creation of customer specific products.)

    Consultar perfil
  • Huub

    a CAD/CAM Consultant

    Heerlen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk AutoCAD
    Autodesk Fusion 360
    Autodesk Inventor
    Autodesk FeatureCAM
    Autodesk Revit
    Programação CNC
    CAD / CAM
    CNC

    Door mijn ruime ervaring (+25 jaar) op het gebied van CAM, maar zeker ook CAD kan ik u in mijn huidige functie als CAD/CAM consultant adviseren, trainen en ondersteunen om helemaal klaar te zijn voor de toekomst.)

    Consultar perfil
  • Ian

    a Mechanical Design Engineer/Inventor and Forge API

    Cardiff, United Kingdom

    €1.200,-

    por dia (IVA excluído)
    Autodesk Inventor
    Autodesk Inventor CAM
    Autodesk Fusion 360
    Autodesk AutoCAD
    Autodesk AutoCAD Mechanical
    Autodesk Forge
    Autodesk Vault
    iLogic

    Experienced in the design and manufacture of mechanical assemblies and components. Can automate Autodesk Inventor using the API and also write software that links into Inventor and AutoCAD. Configurators, plugins and price quote generators in C#/VB.Net.)

    Consultar perfil
  • Frank

    a Project manager

    Heerlen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk Vault
    Cadac Organice Vault
    Autodesk BIM 360 Docs
    Gestão de dados e cooperação
    Data management & collaboration
    Microsoft SharePoint

    Ervaren en communicatief sterke IT project/change-manager, als een vis in het water in complexere/grootschalige implementaties van document management oplossingen op basis van Cadac Organice, Microsoft SharePoint en/of Autodesk Vault.)

    Consultar perfil
  • Jaap

    a Manufacturing Consultant

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk Inventor
    Autodesk Vault
    Cadac NXTdim
    Technical drawing
    3D modelling
    Parametric design

    Begonnen met AutoCAD 0 (Tekenplank). Daarna de implementatie van CAD op de voet gevolgd en mee gewerkt. Van Autodesk AutoCAD 10 2D naar AutoCAD 12 AME 3D, naar Mechanical Desktop tot de lancering van Inventor 2 en tot nu Inventor 2020)

    Consultar perfil
  • Jan-Willem

    a Manufacturing Consultant

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk Vault
    Cadac Organice Vault
    Cadac NXTdim
    Gestão de dados e cooperação
    Autodesk Inventor
    Product data management (PDM)

    Al meer dan 15 jaar doe ik Autodesk Manufacturing software implementaties en trainingen. Deze ervaring gebruik als Product Data Management specialist om bij u de meeste rendement uit de software te halen. )

    Consultar perfil
  • Jarno

    a AutoCAD Infra Consultant

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk AutoCAD Map 3D
    Configuração de local de trabalho CAD
    Autodesk InfraWorks
    Autodesk Civil 3D
    Autodesk Vault
    Autodesk ReCap
    Autodesk Navisworks
    Autodesk BIM 360
    Mais áreas de especialização

    Fulltime AutoCAD Consultant. Bij NG leveren we oplossingen voor CAD pakketten die betrekking hebben op gebiedsinrichting en infrastructurele werken. Ik kan snel schakelen naargelang uw behoeften. Mijn werkzaamheden: trainingen, installaties, configuraties.)

    Consultar perfil
  • Jean-Pierre

    a Technical Sales Specialist Autodesk Media & Entertainment

    Bosschenhoofd, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk 3ds Max
    Autodesk Maya
    Visualização 3D
    Animação 3D
    Unity
    Virtual Reality (VR)
    Virtual reality (VR)
    Efeitos visuais (VFX)
    Mais áreas de especialização

    Jean-Pierre started using Autodesk products twenty seven years ago. After learning AutoCAD 12 and 3D Studio DOS version 3.0 he started his long career as an AutoCAD draftsman. )

    Consultar perfil
  • Jeroen

    a Senior consultant

    Vijfheerenlanden, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Gestão de dados e cooperação
    Bentley Microstation
    GEOCAD

    With my experience at the local government, I am familiar with the work processes. I ensure that together we get the best out of the software.)

    Consultar perfil
  • Jordy

    a BIM Specialist

    Sittard-Geleen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk Civil 3D
    Autodesk Navisworks
    Autodesk InfraWorks
    VB.net
    Autodesk BIM 360 Docs
    Coordenação do modelo BIM
    BIM
    Civil engineering
    Mais áreas de especialização

    Vanuit het traditionele werken in de infrastructuur (RAW bestek, directie & toezicht) ben ik in ruim 20 jaar doorgegroeid naar een wereld die vooral bestaat uit BIM, data management en Object Type Libraries (OTL). )

    Consultar perfil
  • Joris

    a Managing Director 3D AM BV

    Limburg, Belgium

    €1.200,-

    por dia (IVA excluído)
    CAM para imprimir em 3D
    Design for additive manufacturing (DfAM)
    Additive manufacturing
    Autodesk Netfabb
    Desenvolvimento e inovação de produtos
    Generative design
    Industrial design
    Software de design CAD
    Mais áreas de especialização

    Independent advice and support to lead your company in finding opportunities for digitalizing your production, design and engineering and tailormade optimization and automation of your processes. )

    Consultar perfil
  • Jos

    a Mechatronica expert

    Maastricht, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Projeto 3D
    Autodesk Fusion 360
    Autodesk Inventor
    Desenvolvimento e inovação de produtos
    Laminado
    Sistemas eletrónicos
    Autodesk Eagle
    CAM para Eagle

    Zowel elektronisch als mechanisch R&D engineering in Fusion360. Expert in mechatronische projecten met bewegende delen, die in een klein jasje moeten passen en/of waterdicht moeten zijn. )

    Consultar perfil
  • Justin

    a Consultant Manufacturing

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Product lifecycle management (PLM)
    Product data management (PDM)
    Cadac Organice Vault
    Cadac NXTdim
    Autodesk Vault
    Autodesk Inventor
    Gestão de dados e cooperação
    Modelagem 3D
    Mais áreas de especialização

    My primary goal is helping our customers with creating a single source of truth concerning their (product) design information. )

    Consultar perfil
  • Justus

    a CAD/CAM en Rapid Prototyping expert

    Vlaardingen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    CAD / CAM
    Autodesk Fusion 360
    Programação CNC
    CAM para transformações CNC
    Transformações CNC
    CNC post processors
    CNC
    3D modelling

    Do you need advice or help with the implementation of your CAD/CAM workflow? I can help you improve the existing situation or establish a completely new one, from design and software to machinery, from A to Z. )

    Consultar perfil
  • Kelly

    a AEC Consultant

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
  • Kevin

    a Business Consultant

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk BIM 360 Design
    Autodesk BIM 360 Build
    Autodesk BIM 360 Docs
    Autodesk BIM 360
    BIM
    Autodesk AutoCAD
    Power BI
    Autodesk Revit
    Mais áreas de especialização

    Als een conceptueel denker ben ik in staat om de eisen en wensen van de eindgebruiker te begrijpen. Ik voel me comfortabel wanneer ik werk met verschillende typen personen en heb een persoonlijke aanpak.)

    Consultar perfil
  • Leon

    a Product Manager / Consultant

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    VB.net
    Cadac NXTdim Configurator
    Cadac NXTdim
    Autodesk Configurator 360
    Autodesk Fusion 360
    Autodesk Inventor
    Cadac Modules
    iLogic
    Mais áreas de especialização

    Door jarenlange ervaring kan ik helpen uw engineeringsprocessen te optimaliseren door bijvoorbeeld veel voorkomende handelingen te automatiseren met iLogic, Inventor add-ins of Vault extensies. )

    Consultar perfil
  • Lisette

    a Front-end Consultant

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    NedGeoservices
    NedGlobe
    NedBrowser
    NedMagazijn Kernregistraties

    Meer dan 25 jaar ervaring in de ICT, geeft een goede basis om U te helpen uw GIS applicatie en processen zo efficiënt mogelijk in te richten. )

    Consultar perfil
  • Lou

    a Consultant AEC

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk Revit MEP
    Autodesk Revit
    Criação de Revit Family
    BIM
    Microsoft Office
    Autodesk Dynamo
    Autodesk BIM 360 Build
    Autodesk BIM 360
    Mais áreas de especialização

    Ik haal voldoening uit het samen met de verschillende stakeholders, een project naar een mooi eindresultaat te brengen. Dat kan ik in verschillende rollen. Het project zo insteken dat het profijtelijk is voor elke deelnemer en helpen de juiste keuzes te maken.)

    Consultar perfil
  • Maarten

    a Senior CTO Consultant

    Vijfheerenlanden, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Configure to Order (CTO)
    Change Management
    Desenvolvimento e inovação de produtos
    Industrial design
    Electrical design
    Projeto mecânico 3D

    Op basis van openheid, gelijkwaardigheid en met oog voor het verander proces, zet ik jullie, mezelf én mijn netwerk aan het werk om samen resultaat te behalen.)

    Consultar perfil
  • Malou

    a Architect - Bouwkundig Engineer

    Zundert, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk Revit
    Autodesk AutoCAD
    Projeto arquitetónico
    tecnicas-de-construcao
    Renderização arquitetónica
    Coordenação de projeto BIM
    Criação de Revit Family

    I elaborate my architectural projects into a BIM model in Revit. In addition, I have mastered rendering techniques that allow my presentations to create a realistic image of the projected space. I can translate Pointclouds into a 3D model.)

    Consultar perfil
  • Marcel

    a Senior AutoCAD Infra Consultant

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk AutoCAD
    Autodesk AutoCAD Map 3D
    NedInfra
    Configuração de local de trabalho CAD
    Technical drawing
    2D designs & 2D drawing
    NLCS
    Civil engineering
    Mais áreas de especialização

    Ruim 13 jaar ben ik werkzaam als fulltime AutoCAD Consultant. En al ruim 28 jaar werk ik met Autodesk-producten. Mijn specialiteiten: installatie, configuratie, migratie en licensering van AutoCAD, AutoCAD Map 3D (binnen de disciplines Infra en Government).)

    Consultar perfil
  • Marcel

    a Manufacturing Consultant

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk Inventor
    Autodesk AutoCAD
    Autodesk Vault
    Modelagem 3D
    Projeto 3D
    Autodesk Fusion 360
    Autodesk ReCap

    As an Autodesk Teacher i can take care of trainings for Inventor and AutoCAD. In addition to give trainings it is also possible to realize installations and implementations for these products by customers.)

    Consultar perfil
  • Marcel

    a Senior Consultant

    Vijfheerenlanden, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Product data management (PDM)
    Product lifecycle management (PLM)
    Desenvolvimento e inovação de produtos
    Configure to Order (CTO)
    Change Management
    CPQ
    Projeto mecânico 3D

    Door mijn ruim 8 jr ervaring als business consultant met Configure to Order als specialisme en mijn semiconductor- automotive achtergrond ben ik ervan overtuigd dat ik uw organisatie verder kan helpen bij uw transitie naar Configure to Order.)

    Consultar perfil
  • Marco

    a CAD/CAM Consultant

    10 review(s)

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk FeatureCAM
    Autodesk Inventor CAM
    Autodesk Inventor
    Autodesk Fusion 360
    Autodesk Fusion Team
    Autodesk PowerMill
    HSMSimul
    Autodesk HSMWorks
    Mais áreas de especialização

    Als een CAD/CAM Consultant adviseer, train & ondersteun ik bedrijven met de laatste ontwikkelingen. Mijn specialiteiten: ★ Autodesk Inventor CAD/CAM ★ Autodesk Fusion 360 CAD/CAM ★ HSMSimul (Machine Simulatie) ★ Autodesk FeatureCAM ★ Autodesk PowerMill)

    Consultar perfil
  • Mark

    a sr consultant

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Cadac NXTdim
    Autodesk AutoCAD
    iLogic
    Autodesk Inventor
    CPQ
    Parametric design
    ERP
    configuration
    Mais áreas de especialização

    Omdat CAD op zich al lang geen eiland meer is, ben ik gewoon om CAD met de buitenwereld te laten praten en informatie uit te wisselen met andere processen/software die in een productieomgeving aanwezig zijn)

    Consultar perfil
  • Mark

    a Professional Industriele Automatisering

    Montfoort, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk AutoCAD Electrical
    Eplan
    Autodesk AutoCAD

    Hardware engineering,Data engineering, Standaardisatie en geven van Trainingen (Autocad Electrical, Typical manager en Eplan). Daarnaast veel ervaring in het samenbrengen en optimaliseren van ontwerpprocessen tussen verschillende disciplines.)

    Consultar perfil
  • Merlijn

    a project coordinator / modeler / trainer

    Ede, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Modelagem 3D
    Autodesk Revit Structure
    Autodesk Collaboration for Revit (C4R)
    Autodesk Revit
    Solibri
    Autodesk Navisworks
    Autodesk BIM 360 Docs
    Autodesk Dynamo
    Mais áreas de especialização

    I'm a BIM export with a pragmatic attitude and with strong communication skills. 6+ years of experience in architectural and structural modeling. During this time I esteblished and managed a lot of templates, working methods and international projects)

    Consultar perfil
  • Michael

    a Senior Business Consultant

    Sunshine Coast Regional, Australia

    €1.200,-

    por dia (IVA excluído)
    Autodesk AutoCAD
    Gestão de dados e cooperação
    Microsoft SharePoint
    Asset management
    Modelagem 3D
    Renderização 3D
    Visualização 3D
    3D design
    Mais áreas de especialização

    With my background as a structural engineer, together with my passion for innovations within the broad engineering sector, I have a deep understanding of how to use technology to face the current and future challenges in the world of engineering .)

    Consultar perfil
  • Michiel

    a Consultant AEC

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk Revit MEP
    Autodesk Revit
    Electrical drawing
    Modelagem BIM
    Coordenação do modelo BIM
    HVAC
    MEP
    Coordenação de modelo
    Mais áreas de especialização

    Installatie techniek E/W zijn voor mij dagelijkse werkzaamheden. Help installateurs bij het optimaliseren van hun Revit / BIM omgeving.)

    Consultar perfil
  • Miel

    a Product Manager / Business Consultant

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Microsoft SharePoint
    Cadac Organice TaskForce
    Cadac Organice DCS
    Gestão de dados e cooperação
    Data management & collaboration
    Autodesk BIM 360 Docs
    Microsoft Office

    Als ervaren SharePoint Document Management consultant kan ik u helpen met het implementeren van Document Management binnen uw bedrijf.)

    Consultar perfil
  • Mike

    a BIM consultant

    Maastricht, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk Revit
    Autodesk Navisworks
    Scanning
    Modelagem BIM
    Criação de Revit Family
    Pointclouds
    Gestão de dados e cooperação

    As an advisor, consultant and lecturer with more than 25 years of knowledge of construction data processing and involvement in large projects in construction management, I would like to share my knowledge and experience with you and help you take the next step)

    Consultar perfil
  • Mischa

    a Customer Success Manager

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Desenvolvimento e inovação de produtos
    Product lifecycle management (PLM)
    Product data management (PDM)
    Data management & collaboration
    Systems engineering
    ERP
    IoT
    Digital twin
    Mais áreas de especialização

    I am driven to guide companies in creating awareness about defining, using and standardizing product information and effectively implementing Product Data Management and Product Lifecycle management in their organization)

    Consultar perfil
  • Nevon

    a Revit Modeler

    Heerhugowaard, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk Revit
    Autodesk AutoCAD
    Autodesk Revit MEP
    MEP
    Autodesk Revit Structure
    Criação de Revit Family
    Projeto arquitetónico
    HVAC
    Mais áreas de especialização

    Your Revit specialist with extensive experience and flexible deployment with a lot of passion for innovation. The ability to work both individually and in a team, good communication skills, and adaptability.)

    Consultar perfil
  • Niek

    a Manufacturing Consultant / Autodesk trainer

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Modelagem 3D
    Autodesk Fusion 360
    Autodesk Vault
    Autodesk Inventor
    Design Generativo

    Om zo efficiënt mogelijk te werken met Inventor is een goede implementatie zeer belangrijk.De wensen van de klant te vertalen in een geschikte workflow met Inventor en Vault vormt een belangrijk deel van mijn werkzaamheden.)

    Consultar perfil
  • Noël

    a2 AM expert

    Maastricht, Netherlands

    €1.400,-

    por dia (IVA excluído)
    3D printing
    Additive manufacturing
    Desenvolvimento e inovação de produtos
    3D design
    3D CAD software
    Autodesk Fusion 360

    3D-Druck bringt Ihnen schnell Vorteile. Ich helfe Unternehmen dabei, ihr eigenes Fachwissen zu entwickeln. Fragen Sie einem Quick Scan um Kosten zu sparen. Oder Ihre AM-Strategie. So kennen Sie auch langfristig Ihren Erfolg und Ihre Investitionen.)

    Consultar perfil
  • Olaf

    a Business Consultant

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Gestão de dados e cooperação
    Autodesk BIM 360 Docs
    Cadac NXTdim Configurator
    Cadac Modules
    Data management & collaboration
    Autodesk BIM 360
    Cadac Organice TaskForce
    Cadac Organice DCS

    As a Structural Engineer and by means of more than 18 years of experience in modelling of documentation, approval and design processes. Enable me to support you in analyzing and optimizing the business processes that matter to you.)

    Consultar perfil
  • Pascal

    a Tekenaar - Voorbereider - Coördinator

    Huldenberg Loonbeek, Belgium

    €1.200,-

    por dia (IVA excluído)
    Desenho técnico
    Electric drawing
    Autodesk Revit MEP
    Autodesk AutoCAD
    Autodesk Navisworks

    Tekenaar elektriciteit met veel praktisch ervaring in het vak.De meeste delen van het vak hebben geen geheimen voor mij.Van blokschema naar 3D tekening. Of van 3D naar 2D tekening.)

    Consultar perfil
  • Paul

    a Technischer / Unternehmensberater Cadac Group PP & M BV

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Cadac Organice TaskForce
    Microsoft SharePoint
    Gestão de dados e cooperação
    Cadac Organice DCS
    Autodesk AutoCAD
    CAD software
    LISP

    Mit meinem Wissen über technische Prozesse und meiner Erfahrung mit einer großen Anzahl von Kunden helfe ich Organisationen, interne Geschäftsprozesse zu strukturieren und ihre Dokumentenmanagement- und Dokumentenkontrolllösung zu implementieren/verbessern.)

    Consultar perfil
  • Peter

    a Project Manager

    Heerlen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Gestão de dados e cooperação
    Product data management (PDM)
    Product lifecycle management (PLM)
    Modelagem BIM
    Cadac Modules
    Microsoft SharePoint
    Autodesk Fusion Lifecycle
    Autodesk Inventor
    Mais áreas de especialização

    Ik help u met het maken van een kort en bondig projectplan. Dat geeft u inzicht in verwachte resultaten en de planning in tijd, geld en benodigde resources. Tevens help ik u met het succesvol realiseren van uw project.)

    Consultar perfil
  • Pim

    a Consultant / Product Manager

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk Vault
    Cadac Organice Vault
    Autodesk Inventor
    Cadac NXTdim
    Product data management (PDM)
    Autodesk Fusion Team
    Autodesk Fusion Lifecycle
    Product lifecycle management (PLM)
    Mais áreas de especialização

    Through my many years of extensive experience with Autodesk Inventor and Autodesk Vault I can help you optimise your engineering processes by, for example, automating common operations with iLogic, Inventor add-ins or Vault extensions.)

    Consultar perfil
  • Raymond

    a AutoCAD Consultant

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk AutoCAD
    Configuração de local de trabalho CAD
    Autodesk AutoCAD Map 3D
    Bentley Microstation

    I am a full-time AutoCAD Consultant. My work consists of giving AutoCAD training and installing and configuring software. For a large contracting company in the Netherlands, I am a functional application manager for the BIM process)

    Consultar perfil
  • Raymond

    a Senior consultant AEC

    Vijfheerenlanden, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Gestão de dados e cooperação
    Modelagem 3D
    Visualização 3D
    Criação de projetos
    Virtual Reality (VR)
    Renderização 3D

    Als conceptueel denker ben ik in staat te begrijpen wat de wensen en behoeften van de eindgebruiker zijn. Ik voel me op mijn gemak bij het werken met verschillende karakters en heb een perceptuele benadering.)

    Consultar perfil
  • Remon

    a Consultant Projects - Frontoffice

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    NedBRK
    NedGeoservices
    NedMagazijn Kernregistraties

    Consultant on the Projects department of NedGraphics with more than 10 years of experience on the complete Front- and Backoffice suite.)

    Consultar perfil
  • Rene

    a CAD Consultant/Trainer

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk Inventor
    Plant engineering
    Autodesk Navisworks
    Autodesk AutoCAD
    Autodesk AutoCAD Plant 3D
    Autodesk AutoCAD P&ID
    Autodesk BIM 360 Docs

    Working as a piping engineer with spec documents, engineering, manufacturing, installation, documentation. As a Consultant AutoCAD Plant 3D, this realising in software, configuration / integration and optimization.)

    Consultar perfil
  • Richard

    a Adviseur praktische toepassing CAD/CAM/PLM

    Capelle aan Den IJssel, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Product data management (PDM)
    Systems engineering
    3D design
    2D drafting & 2D drawing
    Digital twin
    Autodesk Inventor
    Asset management
    Desenvolvimento e inovação de produtos
    Mais áreas de especialização

    Allow me to introduce myself. In my opinion, designing and innovating can be more efficient, reducing time-to-market, delivering smarter designs and making the work of your employees more creative and challenging. )

    Consultar perfil
  • Rinke

    a PDM Consultant

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Gestão de dados e cooperação
    Cadac Organice Vault
    Product data management (PDM)
    Autodesk Vault

    As PDM Consultant I am responsible for the implementation of VaultProfessional at customers. This starts with an analysis of the product development process. Then I install and configure the software. Last but not least I train and support the end users.)

    Consultar perfil
  • Robert

    a Mechanical Engineer

    Noordoostpolder, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Desenvolvimento e inovação de produtos
    3D design
    3D CAD software
    Projeto mecânico 3D
    Autodesk Inventor
    Autodesk AutoCAD Mechanical
    Autodesk AutoCAD

    It could be better, more efficient, simpler! Magnificens takes a provocative and inventive look at every problem in the field of engineering. We like to think outside the existing frameworks and therefore often outside our customers' field of vision. )

    Consultar perfil
  • Roel

    a CNC specialist

    Nederweert, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Programação CNC
    Transformações CNC
    CNC post processors
    CAM para transformações CNC
    CAD / CAM
    CNC
    CAM
    Autodesk HSMWorks
    Mais áreas de especialização

    As a specialist in the field of CNC, I can help you with the underlying technology of CNC machines such as kinematics, automation, CAM, programming support, CNC courses, etc. in the broadest sense of the word. )

    Consultar perfil
  • Roelof

    a Consultant Manufacturing / Simulation

    Meppel, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk Nastran
    Autodesk Fusion 360
    Autodesk Inventor
    Autodesk Vault
    CFD
    Simulação
    Design Generativo
    Computational design
    Mais áreas de especialização

    Ik ben expert in simulaties. Begon met het uitvoeren van simulaties in 2006. In eerste instantie met Inventor Stress Analysis, Dynamic Simulation en Frame Analysis. Naar verloop van tijd kwam daar Simulation Mechanical, CFD en Inventor Nastran bij.)

    Consultar perfil
  • Ron

    a Senior Consultant

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk AutoCAD
    Autodesk AutoCAD Map 3D
    Autodesk AutoCAD Mechanical
    Projeto mecânico 3D
    LISP
    VB.net
    Autodesk Civil 3D
    NedInfra
    Mais áreas de especialização

    Ik ben fulltime AutoCAD Development consultant. Mijn werkzaamheden : programmeren van uitbreiding op Autocad, Autocad Map 3D, Civil 3D en andere Autodesk-produkten.)

    Consultar perfil
  • Theo

    a Projectmanager

    Heerlen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Autodesk PowerShape
    Autodesk PowerMill
    Autodesk PowerInspect
    Autodesk FeatureCAM
    Autodesk Inventor CAM
    Autodesk Inventor
    Autodesk Fusion 360
    Autodesk Fusion Team
    Mais áreas de especialização

    Mijn expertise ligt voornamelijk in het aansturen en begeleiden van projecten binnen CAD, CAM, PDM, PLM en documentmanagement. Expertise is opgebouwd in 25+ jaar ervaring in deze branches.)

    Consultar perfil
  • Wil

    a Adviseur

    Vianen, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Gestão de dados e cooperação
    NLCS
    GIS Geographic Information System

    Informatievoorziening over Kabels en Leidingen van bron (netbeheerder) tot eindgebruiker (grondroerder). Keteninzicht vanuit een helikopterview. Wie zijn de stakeholders? Welke plichten hebben ze? Welke risico's lopen ze? )

    Consultar perfil
  • Wouter

    a PDM Berater Herstellung

    Vijfheerenlanden, Netherlands

    €1.200,-

    por dia (IVA excluído)
    Cadac Organice Vault
    Cadac NXTdim
    Autodesk Inventor
    Autodesk Vault
    Product data management (PDM)
    3D modelling
    Technical drawing
    Parametric design
    Mais áreas de especialização

    Mit meinem Hintergrund in Produktdesign, Engineering und Datenmanagement kann ich Ihnen helfen, Inventor und Vault Professional optimal zu nutzen.)

    Consultar perfil

Níveis de especialistas


Temos especialistas com vários níveis de especialização. Fique a conhecê-los abaixo!

  1. Industry Expert €1.300,- - €1.500,- / dia

    O Industry expert acompanha numa fase inicial as tendências e desenvolvimentos nacionais e internacionais nas respetivas indústrias combinando-os e desenvolvendo-os em perspetivas completas e trabalha em estreita colaboração com outras partes interessadas.

    Este especialista destaca-se do resto, presta serviços jamais realizados, responsabiliza-se pelas ações próprias, é corajoso, tem uma autoconfiança incomparável e adquiriu muita experiência ao longo da sua carreira.

    O Industry expert rompe com todas as tradições antiquadas para mostrar que as coisas também podem ser feitas de forma diferente elevando as empresas para o próximo nível, desenvolve ideias para o futuro e posiciona-as num contexto mais alargado com uma perspetiva de longo prazo.

    Este especialista sabe distinguir as consequências dos processos de mudança para a organização, os seus colaboradores, processos de trabalho e relações na indústria.


  2. Business Expert €1.100,- - €1.300,- / dia

    O Business expert identifica as oportunidades oferecidas pelo mercado e sabe atribuir-lhes o valor comercial correto. Este especialista apresenta ideias que remam contra a corrente e converte os desejos dos clientes em objetivos a serem desenvolvidos, abandona os caminhos habituais e apresenta propostas nem sempre óbvias.


    Graças ao conhecimento e experiência adquiridos ao longo dos anos, o business expert passa rapidamente ao cerne da questão e estabelece conexões. Este especialista conhece o mercado e os seus participantes, trabalha de forma autónoma, toma decisões independentes e cria opiniões próprias baseando-se nas suas experiências. Os serviços prestados são de alta qualidade e os seus argumentos são fundamentados com exemplos concretos.


  3. Domain Expert €900,- - €1.100,- / dia

    O Domain expert é a pessoa certa para abordar temas na sua área de negócio específica. Este especialista sabe identificar as causas dos problemas, cria oportunidades, identifica as informações mais importantes, procura dados relevantes, fornece suporte nos fluxos de trabalho e contribui para o desenvolvimento de soluções.


    O domain expert apresenta novas ideias que para os outros (ainda) podem parecer impossíveis e colabora com partes externas tendo em conta o interesse mútuo. Este especialista não só tem pleno conhecimento da sua área de negócio, mas também assume uma atitude profissional, tem grande interesse na sua especialização e mantém-se ao corrente dos mais recentes desenvolvimentos.


  4. Training Expert €700,- - €900,- / dia

    O Training expert sabe transmitir conhecimentos, é capaz de reforçar a aptidão de resolução de problemas das outras pessoas e avalia o efeito das formações. Este especialista tem uma voz clara e inteligível e explica em termos claros e fáceis de entender, dá exemplos adaptados à área de negócio dos formandos e converte informações abstratas em exemplos concretos.


    O training expert dispõe de vasta experiência e do conhecimento certo para ensinar e sabe o que tem prioridade adaptando a sua formação a esse respeito. Além disso, o training expert motiva os formandos a concretizar os seus desejos de crescimento profissional.


  5. Creating Expert €500,- - €700,- / dia

    O Creating expert olha além da solução óbvia reorganizando ideias e dados com o objetivo de criar ideias inovadoras, abordagens alternativas ou soluções menos convencionais.


    O creating expert converte ideias de forma minuciosa e detalhada num plano de ação eficaz e sem perder o foco nos pormenores. Este especialista não só procura oportunidades para melhorar a qualidade mas também olha para o próprio trabalho de forma crítica, explica assuntos complexos em termos claros e facilmente compreensíveis e converte informações abstratas em exemplos concretos.


    O creating expert sabe o que tem prioridade e toma a iniciativa na criação de novas possibilidades para além de manifestar muito interesse no seu trabalho e profissionalismo.


Escolha uma região

Europa

Mundo