How can I upgrade the NXTdim Configurator

Laatst gewijzigd op: 14 de julho de 2023

To install the upgrade, perform the following steps:

1. Close all open programs

2. Download the updated software corresponding with your current Autodesk software release.

Release	Product Downloads
2024	NXTdim Configurator 2024
2023	NXTdim Configurator 2023
2022	NXTdim Configurator 2022
2021	NXTdim Configurator 2021
2020	NXTdim Configurator 2020

3. Unpack the file on an easy to find location.

4. Double-click on the ‘NXTdim Configurator Solutions Installer.exe’ file.

The status of all the components that are available in the 'Solution Installer' will be displayed. In the example above all the components have a green check mark to indicate that they are already installed.

The current 'Solution Installer' contains a new version of all components. That's why the operation selected for the components is 'Upgrade' by default. This is displayed by the blue circle with the white arrow. If this is not the case follow the action described at Step 5.

5. Select one of the components whit your Right Mouse Button, the available options will be shown.

Select 'Upgrade' and press'Next'.

6. Press on 'Finish' if the installation of the components is complete.

At Cadac, we distinguish between Sales, Service & Support. We take Sales & Service for granted. We help you purchase your product, service, training or expert and make sure you can get started without any problems. Free of charge and for nothing. You can start using your software carefree, we make sure you can get the most out of it. Are you running into technical software problems? Then you can use Cadac Support. By submitting the correct information, we can help you as quickly as possible.