Switch from Profile Nordined to Techline or vice versa

Last modified on: 18. Mai 2021

On the AutoCAD commandline type: Options

Click the 'Application button (Big A) and click [ Options ]

Open the Profiles' tab

Select the required profile ( Nordined_10_X or Techline) and click [ Set Current ]

Click [ OK ]

To make sure the application is loaded correctly without having to restart AutoCAD:

On the AutoCAD commandline type: : (Load "ACAD") ( You will see a message S::Startup pass)

On the AutoCAD commandline type: : (S::Startup)

When changing to the Nordined_10_X profile a message is shown: Applicatie wordt geladen!Initializing VBA System... as soon as the application is loaded correctly.

When changing to the Techline profile the Techline Palette appears.

At Cadac, we distinguish between Sales, Service & Support. We take Sales & Service for granted. We help you purchase your product, service, training or expert and make sure you can get started without any problems. Free of charge and for nothing. You can start using your software carefree, we make sure you can get the most out of it. Are you running into technical software problems? Then you can use Cadac Support. By submitting the correct information, we can help you as quickly as possible.